Interactive tool

Dirt Bike Track-Day Fuel Planner

Estimate how much motorcycle fuel to bring from your own measured or assumed gallons-per-hour consumption and planned ride time.

Motocross track-day fuel planning illustration
Plan fuel from your own consumption rate and intended ride time, then add a reserve rather than relying on displacement-based guesses.

Fuel use changes with engine size, tune, surface, rider speed and how much time the bike spends idling. This calculator does not contain a universal consumption number. You enter the rate you have measured or chosen for planning.

The most reliable rate comes from your own bike: start with a known fuel amount, record actual engine/riding time, measure what it takes to refill, then calculate gallons per hour. Keep a safety reserve rather than planning to arrive at the final session with an empty jug.

How to use this tool

Enter planned number of sessions, minutes per session, your estimated gallons per hour and reserve percentage. The result shows planned riding hours, base fuel estimate and fuel including the reserve.

If you do not have a measured consumption rate, use a conservative planning estimate and refine it after the day. Do not copy another rider’s number simply because the bike displacement is similar.

Worked example

Eight 15-minute sessions equal 2.0 hours of planned riding. At an entered consumption of 0.8 gal/hour, base use is 1.6 gallons; with a 25% reserve, the planner suggests bringing at least 2.0 gallons for the motorcycle.

Using it at the track

After each track day, write down the amount used and riding time. Three or four real observations are far more valuable than a generic internet estimate.

For a multi-day event, calculate each day separately and include travel/storage limits for the fuel containers you can safely transport.

Before using the result

Limit: The tool cannot determine fuel consumption for a motorcycle or confirm that an entered fuel type/octane is appropriate.

← All tools